% File: mlsys2023.sty (LaTeX style file for mlsys-2022, version of 2017-10-28) % This file contains the LaTeX formatting parameters for a two-column % conference proceedings that is 8.5 inches wide by 11 inches high. % % Modified by Dimitris Papailiopoulos and Virginia Smith based on style file of ICML 2018, % which can be found at: % % % Hacked by Terran Lane, 2003: % - Updated to use LaTeX2e style file conventions (ProvidesPackage, % etc.) % - Added an ``appearing in'' block at the base of the first column % (thus keeping the ``appearing in'' note out of the bottom margin % where the printer should strip in the page numbers). % - Added a package option [accepted] that selects between the ``Under % review'' notice (default, when no option is specified) and the % ``Appearing in'' notice (for use when the paper has been accepted % and will appear). % % Originally created as: ml2k.sty (LaTeX style file for ICML-2000) % by P. Langley (12/23/99) %%%%%%%%%%%%%%%%%%%% %% This version of the style file supports both a ``review'' version %% and a ``final/accepted'' version. The difference is only in the %% text that appears in the note at the bottom of the first column of %% the first page. The default behavior is to print a note to the %% effect that the paper is under review and don't distribute it. The %% final/accepted version prints an ``Appearing in'' note. To get the %% latter behavior, in the calling file change the ``usepackage'' line %% from: %% \usepackage{icml2018} %% to %% \usepackage[accepted]{icml2018} %%%%%%%%%%%%%%%%%%%% \NeedsTeXFormat{LaTeX2e} \ProvidesPackage{mlsys2023}[2018/07/02 v0.1 mlsys Conference Style File] % Before 2018, \usepackage{times} was in the example TeX, but inevitably % not everybody did it. \RequirePackage{times} % Use fancyhdr package \RequirePackage{fancyhdr} \RequirePackage{color} \RequirePackage{algorithm} \RequirePackage{algorithmic} \RequirePackage{natbib} \RequirePackage{eso-pic} % used by \AddToShipoutPicture \RequirePackage{forloop} %%%%%%%% Options \DeclareOption{accepted}{% \renewcommand{\Notice@String}{\mlsys@appearing} \gdef\isaccepted{1} } \DeclareOption{nohyperref}{% \gdef\nohyperref{1} } \ifdefined\nohyperref\else\ifdefined\hypersetup \definecolor{mydarkblue}{rgb}{0,0.08,0.45} \hypersetup{ % pdftitle={}, pdfauthor={}, pdfsubject={mlsys 2022}, pdfkeywords={}, pdfborder=0 0 0, pdfpagemode=UseNone, colorlinks=true, linkcolor=mydarkblue, citecolor=mydarkblue, filecolor=mydarkblue, urlcolor=mydarkblue, pdfview=FitH} \ifdefined\isaccepted \else \hypersetup{pdfauthor={Anonymous Submission}} \fi \fi\fi %%%%%%%%%%%%%%%%%%%% % This string is printed at the bottom of the page for the % final/accepted version of the ``appearing in'' note. Modify it to % change that text. %%%%%%%%%%%%%%%%%%%% %\newcommand{\ICML@appearing}{\textit{mlsys 2022}, \newcommand{\mlsys@appearing}{ \textit{Proceedings of the $\mathit{6}^{th}$ MLSys Conference}, Miami, Florida, USA, 2023. Copyright 2023 by the author(s).} %%%%%%%%%%%%%%%%%%%% % This string is printed at the bottom of the page for the draft/under % review version of the ``appearing in'' note. Modify it to change % that text. %%%%%%%%%%%%%%%%%%%% \newcommand{\Notice@String}{Preliminary work. Under review by the Machine Learning and Systems (MLSys) Conference\@. Do not distribute.} % Cause the declared options to actually be parsed and activated \ProcessOptions\relax % Uncomment the following for debugging. It will cause LaTeX to dump % the version of the ``appearing in'' string that will actually appear % in the document. %\typeout{>> Notice string='\Notice@String'} % Change citation commands to be more like old ICML styles \newcommand{\yrcite}[1]{\citeyearpar{#1}} \renewcommand{\cite}[1]{\citep{#1}} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % to ensure the letter format is used. pdflatex does compile the % page size into the pdf. This is done using \pdfpagewidth and % \pdfpageheight. As Latex does not know this directives, we first % check whether pdflatex or latex is used. % % Kristian Kersting 2005 % % in order to account for the more recent use of pdfetex as the default % compiler, I have changed the pdf verification. % % Ricardo Silva 2007 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \paperwidth=8.5in \paperheight=11in % old PDFLaTex verification, circa 2005 % %\newif\ifpdf\ifx\pdfoutput\undefined % \pdffalse % we are not running PDFLaTeX %\else % \pdfoutput=1 % we are running PDFLaTeX % \pdftrue %\fi \newif\ifpdf %adapted from ifpdf.sty \ifx\pdfoutput\undefined \else \ifx\pdfoutput\relax \else \ifcase\pdfoutput \else \pdftrue \fi \fi \fi \ifpdf % \pdfpagewidth=\paperwidth % \pdfpageheight=\paperheight \setlength{\pdfpagewidth}{8.5in} \setlength{\pdfpageheight}{11in} \fi % Physical page layout \evensidemargin -0.23in \oddsidemargin -0.23in \setlength\textheight{9.0in} \setlength\textwidth{6.75in} \setlength\columnsep{0.25in} \setlength\headheight{10pt} \setlength\headsep{10pt} \addtolength{\topmargin}{-20pt} \addtolength{\topmargin}{-0.29in} % Historically many authors tried to include packages like geometry or fullpage, % which change the page layout. It either makes the proceedings inconsistent, or % wastes organizers' time chasing authors. So let's nip these problems in the % bud here. -- Iain Murray 2018. %\RequirePackage{printlen} \AtBeginDocument{% % To get the numbers below, include printlen package above and see lengths like this: %\printlength\oddsidemargin\\ %\printlength\headheight\\ %\printlength\textheight\\ %\printlength\marginparsep\\ %\printlength\footskip\\ %\printlength\hoffset\\ %\printlength\paperwidth\\ %\printlength\topmargin\\ %\printlength\headsep\\ %\printlength\textwidth\\ %\printlength\marginparwidth\\ %\printlength\marginparpush\\ %\printlength\voffset\\ %\printlength\paperheight\\ % \newif\ifmarginsmessedwith \marginsmessedwithfalse \ifdim\oddsidemargin=-16.62178pt \else oddsidemargin has been altered.\\ \marginsmessedwithtrue\fi \ifdim\headheight=10.0pt \else headheight has been altered.\\ \marginsmessedwithtrue\fi \ifdim\textheight=650.43pt \else textheight has been altered.\\ \marginsmessedwithtrue\fi \ifdim\marginparsep=11.0pt \else marginparsep has been altered.\\ \marginsmessedwithtrue\fi \ifdim\footskip=0.0pt \else footskip has been altered.\\ \marginsmessedwithtrue\fi \ifdim\hoffset=0.0pt \else hoffset has been altered.\\ \marginsmessedwithtrue\fi \ifdim\paperwidth=614.295pt \else paperwidth has been altered.\\ \marginsmessedwithtrue\fi \ifdim\topmargin=-24.95781pt \else topmargin has been altered.\\ \marginsmessedwithtrue\fi \ifdim\headsep=10.0pt \else headsep has been altered.\\ \marginsmessedwithtrue\fi \ifdim\textwidth=487.8225pt \else textwidth has been altered.\\ \marginsmessedwithtrue\fi \ifdim\marginparwidth=65.0pt \else marginparwidth has been altered.\\ \marginsmessedwithtrue\fi \ifdim\marginparpush=5.0pt \else marginparpush has been altered.\\ \marginsmessedwithtrue\fi \ifdim\voffset=0.0pt \else voffset has been altered.\\ \marginsmessedwithtrue\fi \ifdim\paperheight=794.96999pt \else paperheight has been altered.\\ \marginsmessedwithtrue\fi \ifmarginsmessedwith \textbf{\large \em The page layout violates the ICML style.} Please do not change the page layout, or include packages like geometry, savetrees, or fullpage, which change it for you. We're not able to reliably undo arbitrary changes to the style. Please remove the offending package(s), or layout-changing commands and try again. \fi} %% The following is adapted from code in the acmconf.sty conference %% style file. The constants in it are somewhat magical, and appear %% to work well with the two-column format on US letter paper that %% ICML uses, but will break if you change that layout, or if you use %% a longer block of text for the copyright notice string. Fiddle with %% them if necessary to get the block to fit/look right. %% %% -- Terran Lane, 2003 %% %% The following comments are included verbatim from acmconf.sty: %% %%% This section (written by KBT) handles the 1" box in the lower left %%% corner of the left column of the first page by creating a picture, %%% and inserting the predefined string at the bottom (with a negative %%% displacement to offset the space allocated for a non-existent %%% caption). %%% \def\ftype@copyrightbox{8} \def\@copyrightspace{ % Create a float object positioned at the bottom of the column. Note % that because of the mystical nature of floats, this has to be called % before the first column is populated with text (e.g., from the title % or abstract blocks). Otherwise, the text will force the float to % the next column. -- TDRL. \@float{copyrightbox}[b] \begin{center} \setlength{\unitlength}{1pc} \begin{picture}(20,1.5) % Create a line separating the main text from the note block. % 4.818pc==0.8in. \put(0,2.5){\line(1,0){4.818}} % Insert the text string itself. Note that the string has to be % enclosed in a parbox -- the \put call needs a box object to % position. Without the parbox, the text gets splattered across the % bottom of the page semi-randomly. The 19.75pc distance seems to be % the width of the column, though I can't find an appropriate distance % variable to substitute here. -- TDRL. \put(0,0){\parbox[b]{19.75pc}{\small \Notice@String}} \end{picture} \end{center} \end@float} % Note: A few Latex versions need the next line instead of the former. % \addtolength{\topmargin}{0.3in} % \setlength\footheight{0pt} \setlength\footskip{0pt} %\pagestyle{empty} \flushbottom \twocolumn \sloppy % Clear out the addcontentsline command \def\addcontentsline#1#2#3{} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% commands for formatting paper title, author names, and addresses. %%start%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%% title as running head -- Kristian Kersting 2005 %%%%%%%%%%%%% %\makeatletter %\newtoks\mytoksa %\newtoks\mytoksb %\newcommand\addtomylist[2]{% % \mytoksa\expandafter{#1}% % \mytoksb{#2}% % \edef#1{\the\mytoksa\the\mytoksb}% %} %\makeatother % box to check the size of the running head \newbox\titrun % general page style \pagestyle{fancy} \fancyhf{} \fancyhead{} \fancyfoot{} % set the width of the head rule to 1 point \renewcommand{\headrulewidth}{1pt} % definition to set the head as running head in the preamble \def\mlsystitlerunning#1{\gdef\@mlsystitlerunning{#1}} % main definition adapting \mlsystitle from 2022 \long\def\mlsystitle#1{% %check whether @mlsystitlerunning exists % if not \mlsystitle is used as running head \ifx\undefined\@mlsystitlerunning% \gdef\@mlsystitlerunning{#1} \fi %add it to pdf information \ifdefined\nohyperref\else\ifdefined\hypersetup \hypersetup{pdftitle={#1}} \fi\fi %get the dimension of the running title \global\setbox\titrun=\vbox{\small\bf\@mlsystitlerunning} % error flag \gdef\@runningtitleerror{0} % running title too long \ifdim\wd\titrun>\textwidth% {\gdef\@runningtitleerror{1}}% % running title breaks a line \else\ifdim\ht\titrun>6.25pt {\gdef\@runningtitleerror{2}}% \fi \fi % if there is somthing wrong with the running title \ifnum\@runningtitleerror>0 \typeout{}% \typeout{}% \typeout{*******************************************************}% \typeout{Title exceeds size limitations for running head.}% \typeout{Please supply a shorter form for the running head} \typeout{with \string\mlsystitlerunning{...}\space prior to \string\begin{document}}% \typeout{*******************************************************}% \typeout{}% \typeout{}% % set default running title \chead{\small\bf Title Suppressed Due to Excessive Size}% \else % 'everything' fine, set provided running title \chead{\small\bf\@mlsystitlerunning}% \fi % no running title on the first page of the paper \thispagestyle{empty} %%%%%%%%%%%%%%%%%%%% Kristian Kersting %%%%%%%%%%%%%%%%%%%%%%%%% %end%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% {\center\baselineskip 18pt \toptitlebar{\Large\bf\scshape #1}\bottomtitlebar} } \gdef\icmlfullauthorlist{} \newcommand\addstringtofullauthorlist{\g@addto@macro\icmlfullauthorlist} \newcommand\addtofullauthorlist[1]{% \ifdefined\icmlanyauthors% \addstringtofullauthorlist{, #1}% \else% \addstringtofullauthorlist{#1}% \gdef\icmlanyauthors{1}% \fi% \ifdefined\nohyperref\else\ifdefined\hypersetup% \hypersetup{pdfauthor=\icmlfullauthorlist}% \fi\fi} %%% GS: changed toptitlebar from 1pt to 2pt \def\toptitlebar{\hrule height2pt \vskip .25in} \def\bottomtitlebar{\vskip .22in \hrule height1pt \vskip .3in} \newenvironment{mlsysauthorlist}{% \setlength\topsep{0pt} \setlength\parskip{0pt} \begin{center} }{% \end{center} } \newcounter{@affiliationcounter} \newcommand{\@pa}[1]{% % ``#1'' \ifcsname the@affil#1\endcsname % do nothing \else \ifcsname @icmlsymbol#1\endcsname % nothing \else \stepcounter{@affiliationcounter}% \newcounter{@affil#1}% \setcounter{@affil#1}{\value{@affiliationcounter}}% \fi \fi% \ifcsname @icmlsymbol#1\endcsname \textsuperscript{\csname @icmlsymbol#1\endcsname\,}% \else %\expandafter\footnotemark[\arabic{@affil#1}\,]% \textsuperscript{\arabic{@affil#1}\,}% \fi } %\newcommand{\mlsysauthor}[2]{% %\addtofullauthorlist{#1}% %#1\@for\theaffil:=#2\do{\pa{\theaffil}}% %} \newcommand{\mlsysauthor}[2]{% \ifdefined\isaccepted \mbox{\bf #1}\,\@for\theaffil:=#2\do{\@pa{\theaffil}} \addtofullauthorlist{#1}% \else \ifdefined\@icmlfirsttime \else \gdef\@icmlfirsttime{1} \mbox{\bf Anonymous Authors}\@pa{@anon} \addtofullauthorlist{Anonymous Authors} \fi \fi } \newcommand{\mlsyssetsymbol}[2]{% \expandafter\gdef\csname @icmlsymbol#1\endcsname{#2} } \newcommand{\mlsysaffiliation}[2]{% \ifdefined\isaccepted \ifcsname the@affil#1\endcsname \expandafter\gdef\csname @affilname\csname the@affil#1\endcsname\endcsname{#2}% \else {\bf AUTHORERR: Error in use of \textbackslash{}mlsysaffiliation command. Label ``#1'' not mentioned in some \textbackslash{}mlsysauthor\{author name\}\{labels here\} command beforehand. } \typeout{}% \typeout{}% \typeout{*******************************************************}% \typeout{Affiliation label undefined. }% \typeout{Make sure \string\mlsysaffiliation\space follows } \typeout{all of \string\mlsysauthor\space commands}% \typeout{*******************************************************}% \typeout{}% \typeout{}% \fi \else % \isaccepted % can be called multiple times... it's idempotent \expandafter\gdef\csname @affilname1\endcsname{Anonymous Institution, Anonymous City, Anonymous Region, Anonymous Country} \fi } \newcommand{\mlsyscorrespondingauthor}[2]{ \ifdefined\isaccepted \ifdefined\mlsyscorrespondingauthor@text \g@addto@macro\mlsyscorrespondingauthor@text{, #1 \textless{}#2\textgreater{}} \else \gdef\mlsyscorrespondingauthor@text{#1 \textless{}#2\textgreater{}} \fi \else \gdef\mlsyscorrespondingauthor@text{Anonymous Author \textless{}anon.email@domain.com\textgreater{}} \fi } \newcommand{\mlsysEqualContribution}{\textsuperscript{*}Equal contribution } \newcounter{@affilnum} \newcommand{\printAffiliationsAndNotice}[1]{% \stepcounter{@affiliationcounter}% {\let\thefootnote\relax\footnotetext{\hspace*{-\footnotesep}\ifdefined\isaccepted #1\fi% \forloop{@affilnum}{1}{\value{@affilnum} < \value{@affiliationcounter}}{ \textsuperscript{\arabic{@affilnum}}\ifcsname @affilname\the@affilnum\endcsname% \csname @affilname\the@affilnum\endcsname% \else {\bf AUTHORERR: Missing \textbackslash{}mlsysaffiliation.} \fi }. \ifdefined\mlsyscorrespondingauthor@text Correspondence to: \mlsyscorrespondingauthor@text. \else {\bf AUTHORERR: Missing \textbackslash{}mlsyscorrespondingauthor.} \fi \ \\ \Notice@String } } } %\makeatother \long\def\icmladdress#1{% {\bf The \textbackslash{}icmladdress command is no longer used. See the example\_paper PDF .tex for usage of \textbackslash{}icmlauther and \textbackslash{}mlsysaffiliation.} } %% keywords as first class citizens \def\mlsyskeywords#1{% % \ifdefined\isaccepted \else % \par {\bf Keywords:} #1% % \fi % \ifdefined\nohyperref\else\ifdefined\hypersetup % \hypersetup{pdfkeywords={#1}} % \fi\fi % \ifdefined\isaccepted \else % \par {\bf Keywords:} #1% % \fi \ifdefined\nohyperref\else\ifdefined\hypersetup \hypersetup{pdfkeywords={#1}} \fi\fi } % modification to natbib citations \setcitestyle{authoryear,round,citesep={;},aysep={,},yysep={;}} % Redefinition of the abstract environment. \renewenvironment{abstract} {% % Insert the ``appearing in'' copyright notice. %\@copyrightspace \centerline{\large\bf\scshape Abstract} \vspace{-0.12in}\begin{quote}} {\par\end{quote}\vskip 0.12in} % numbered section headings with different treatment of numbers \def\@startsection#1#2#3#4#5#6{\if@noskipsec \leavevmode \fi \par \@tempskipa #4\relax \@afterindenttrue % Altered the following line to indent a section's first paragraph. % \ifdim \@tempskipa <\z@ \@tempskipa -\@tempskipa \@afterindentfalse\fi \ifdim \@tempskipa <\z@ \@tempskipa -\@tempskipa \fi \if@nobreak \everypar{}\else \addpenalty{\@secpenalty}\addvspace{\@tempskipa}\fi \@ifstar {\@ssect{#3}{#4}{#5}{#6}}{\@dblarg{\@sict{#1}{#2}{#3}{#4}{#5}{#6}}}} \def\@sict#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth \def\@svsec{}\else \refstepcounter{#1}\edef\@svsec{\csname the#1\endcsname}\fi \@tempskipa #5\relax \ifdim \@tempskipa>\z@ \begingroup #6\relax %%% GS: changed @svsec from .~ to \quad \@hangfrom{\hskip #3\relax\@svsec\quad}{\interlinepenalty \@M #8\par} \endgroup \csname #1mark\endcsname{#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}\else \def\@svsechd{#6\hskip #3\@svsec #8\csname #1mark\endcsname {#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}}\fi \@xsect{#5}} \def\@sect#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth \def\@svsec{}\else \refstepcounter{#1}\edef\@svsec{\csname the#1\endcsname\hskip 0.4em }\fi \@tempskipa #5\relax \ifdim \@tempskipa>\z@ \begingroup #6\relax \@hangfrom{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par} \endgroup \csname #1mark\endcsname{#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}\else \def\@svsechd{#6\hskip #3\@svsec #8\csname #1mark\endcsname {#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}}\fi \@xsect{#5}} % section headings with less space above and below them \def\thesection {\arabic{section}} \def\thesubsection {\thesection.\arabic{subsection}} %%% GS: added \scshape below \def\section{\@startsection{section}{1}{\z@}{-0.12in}{0.02in} {\large\bf\scshape\raggedright}} \def\subsection{\@startsection{subsection}{2}{\z@}{-0.10in}{0.01in} {\normalsize\bf\raggedright}} %%% GS: removed \sc below, added \itshape \def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-0.08in}{0.01in} {\normalsize\itshape\raggedright}} \def\paragraph{\@startsection{paragraph}{4}{\z@}{1.5ex plus 0.5ex minus .2ex}{-1em}{\normalsize\bf}} \def\subparagraph{\@startsection{subparagraph}{5}{\z@}{1.5ex plus 0.5ex minus .2ex}{-1em}{\normalsize\bf}} % Footnotes \footnotesep 6.65pt % \skip\footins 9pt \def\footnoterule{\kern-3pt \hrule width 0.8in \kern 2.6pt } \setcounter{footnote}{0} % Lists and paragraphs \parindent 0pt \topsep 4pt plus 1pt minus 2pt \partopsep 1pt plus 0.5pt minus 0.5pt \itemsep 2pt plus 1pt minus 0.5pt \parsep 2pt plus 1pt minus 0.5pt \parskip 6pt \leftmargin 2em \leftmargini\leftmargin \leftmarginii 2em \leftmarginiii 1.5em \leftmarginiv 1.0em \leftmarginv .5em \leftmarginvi .5em \labelwidth\leftmargini\advance\labelwidth-\labelsep \labelsep 5pt \def\@listi{\leftmargin\leftmargini} \def\@listii{\leftmargin\leftmarginii \labelwidth\leftmarginii\advance\labelwidth-\labelsep \topsep 2pt plus 1pt minus 0.5pt \parsep 1pt plus 0.5pt minus 0.5pt \itemsep \parsep} \def\@listiii{\leftmargin\leftmarginiii \labelwidth\leftmarginiii\advance\labelwidth-\labelsep \topsep 1pt plus 0.5pt minus 0.5pt \parsep \z@ \partopsep 0.5pt plus 0pt minus 0.5pt \itemsep \topsep} \def\@listiv{\leftmargin\leftmarginiv \labelwidth\leftmarginiv\advance\labelwidth-\labelsep} \def\@listv{\leftmargin\leftmarginv \labelwidth\leftmarginv\advance\labelwidth-\labelsep} \def\@listvi{\leftmargin\leftmarginvi \labelwidth\leftmarginvi\advance\labelwidth-\labelsep} \abovedisplayskip 7pt plus2pt minus5pt% \belowdisplayskip \abovedisplayskip \abovedisplayshortskip 0pt plus3pt% \belowdisplayshortskip 4pt plus3pt minus3pt% % Less leading in most fonts (due to the narrow columns) % The choices were between 1-pt and 1.5-pt leading \def\@normalsize{\@setsize\normalsize{11pt}\xpt\@xpt} \def\small{\@setsize\small{10pt}\ixpt\@ixpt} \def\footnotesize{\@setsize\footnotesize{10pt}\ixpt\@ixpt} \def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt} \def\tiny{\@setsize\tiny{7pt}\vipt\@vipt} \def\large{\@setsize\large{14pt}\xiipt\@xiipt} \def\Large{\@setsize\Large{16pt}\xivpt\@xivpt} \def\LARGE{\@setsize\LARGE{20pt}\xviipt\@xviipt} \def\huge{\@setsize\huge{23pt}\xxpt\@xxpt} \def\Huge{\@setsize\Huge{28pt}\xxvpt\@xxvpt} % Revised formatting for figure captions and table titles. \newsavebox\newcaptionbox\newdimen\newcaptionboxwid \long\def\@makecaption#1#2{ \vskip 10pt \baselineskip 11pt \setbox\@tempboxa\hbox{#1. #2} \ifdim \wd\@tempboxa >\hsize \sbox{\newcaptionbox}{\small\sl #1.~} \newcaptionboxwid=\wd\newcaptionbox \usebox\newcaptionbox {\footnotesize #2} % \usebox\newcaptionbox {\small #2} \else \centerline{{\small\sl #1.} {\small #2}} \fi} \def\fnum@figure{Figure \thefigure} \def\fnum@table{Table \thetable} % Strut macros for skipping spaces above and below text in tables. \def\abovestrut#1{\rule[0in]{0in}{#1}\ignorespaces} \def\belowstrut#1{\rule[-#1]{0in}{#1}\ignorespaces} \def\abovespace{\abovestrut{0.20in}} \def\aroundspace{\abovestrut{0.20in}\belowstrut{0.10in}} \def\belowspace{\belowstrut{0.10in}} % Various personal itemization commands. \def\texitem#1{\par\noindent\hangindent 12pt \hbox to 12pt {\hss #1 ~}\ignorespaces} \def\icmlitem{\texitem{$\bullet$}} % To comment out multiple lines of text. \long\def\comment#1{} %% Line counter (not in final version). Adapted from NIPS style file by Christoph Sawade % Vertical Ruler % This code is, largely, from the CVPR 2010 conference style file % ----- define vruler \makeatletter \newbox\icmlrulerbox \newcount\icmlrulercount \newdimen\icmlruleroffset \newdimen\cv@lineheight \newdimen\cv@boxheight \newbox\cv@tmpbox \newcount\cv@refno \newcount\cv@tot % NUMBER with left flushed zeros \fillzeros[] \newcount\cv@tmpc@ \newcount\cv@tmpc \def\fillzeros[#1]#2{\cv@tmpc@=#2\relax\ifnum\cv@tmpc@<0\cv@tmpc@=-\cv@tmpc@\fi \cv@tmpc=1 % \loop\ifnum\cv@tmpc@<10 \else \divide\cv@tmpc@ by 10 \advance\cv@tmpc by 1 \fi \ifnum\cv@tmpc@=10\relax\cv@tmpc@=11\relax\fi \ifnum\cv@tmpc@>10 \repeat \ifnum#2<0\advance\cv@tmpc1\relax-\fi \loop\ifnum\cv@tmpc<#1\relax0\advance\cv@tmpc1\relax\fi \ifnum\cv@tmpc<#1 \repeat \cv@tmpc@=#2\relax\ifnum\cv@tmpc@<0\cv@tmpc@=-\cv@tmpc@\fi \relax\the\cv@tmpc@}% % \makevruler[][][][][] \def\makevruler[#1][#2][#3][#4][#5]{ \begingroup\offinterlineskip \textheight=#5\vbadness=10000\vfuzz=120ex\overfullrule=0pt% \global\setbox\icmlrulerbox=\vbox to \textheight{% { \parskip=0pt\hfuzz=150em\cv@boxheight=\textheight \cv@lineheight=#1\global\icmlrulercount=#2% \cv@tot\cv@boxheight\divide\cv@tot\cv@lineheight\advance\cv@tot2% \cv@refno1\vskip-\cv@lineheight\vskip1ex% \loop\setbox\cv@tmpbox=\hbox to0cm{ % side margin \hfil {\hfil\fillzeros[#4]\icmlrulercount} }% \ht\cv@tmpbox\cv@lineheight\dp\cv@tmpbox0pt\box\cv@tmpbox\break \advance\cv@refno1\global\advance\icmlrulercount#3\relax \ifnum\cv@refno<\cv@tot\repeat } } \endgroup }% \makeatother % ----- end of vruler % \makevruler[][][][][] \def\icmlruler#1{\makevruler[12pt][#1][1][3][\textheight]\usebox{\icmlrulerbox}} \AddToShipoutPicture{% \icmlruleroffset=\textheight \advance\icmlruleroffset by 5.2pt % top margin \color[rgb]{.7,.7,.7} \ifdefined\isaccepted \else \AtTextUpperLeft{% \put(\LenToUnit{-35pt},\LenToUnit{-\icmlruleroffset}){%left ruler \icmlruler{\icmlrulercount}} % \put(\LenToUnit{1.04\textwidth},\LenToUnit{-\icmlruleroffset}){%right ruler % \icmlruler{\icmlrulercount}} } \fi } \endinput